Citilink :: A service of the Fort Wayne Public Transportation Corporation

Joblink
Home

Employer's
Entrance

Click here to go back to the
Commuter main page.

For more Joblink information,
contact Betsy Kachmar at Citilink (260) 432-4977 or bek@fwcitilink.com

Joblink: Bike Loading Information

Loading Your Bike:

.
1. Tell the bus driver you’re loading your bike. Load from the curbside only. Do not step beyond the driver’s side of the bus into the traffic lane to load your bike.

2. Pull down to release folded bike rack.

.
3. Lift your bike onto the rack, fitting wheels into the slots. Each slot is labeled for front and rear wheels. Your bike must fit securely in the rack in order to be transported.

.
4. Raise and release the support arm over the top of the front tire. Make sure the support arm is resting on the tire and not on the fender of the bike.

Unloading Your Bike:

1. Tell the driver you need to unload your bike when you approach your stop.
2. Raise the support arm off the tire. Move the support arm down, out of your way.
3. Lift your bike out of the rack.
4. Fold up the bike rack if there is no other bike in the rack.
5. Return to the curb with your bike and wait for the bus to leave before entering traffic.

Bike loading information courtesy of Indygo.net.

You can also download this information in our Rack-&-Roll guide here.

Be sure to view this entertaining instructional video on "How to Use a Bike Rack".


Every weekday, public transportation takes an estimated 14 million people where they need to go. Learn more	Citilink makes the safety and security of its passengers a top priority. Learn more	Public transportation provides freedom to pursue opportunities, make choices, and enjoy greater access and mobility. Learn more